Collection: Wood Grain & Burl Guitar Skins

Wood grain artwork gives a plain or worn guitar body the look of figured timber, from the deep ripple of quilted maple to spalted lines, cracked tree rings and rainbow-stained slats. Each design comes as a 50×60 cm sheet for a whole guitar or bass body, or a 27.5×33 cm pickguard sheet, with a high-gloss laminate already applied.

  • Full body 50×60 cm or pickguard sheet
  • High-gloss laminated vinyl
  • No clear coat needed
  • In stock or printed to order
Sizes, fitting and questionsShow less

Two sizes, one design

The full body sheet (50×60 cm) covers the front and sides of any guitar or bass body in one piece. The pickguard sheet (27.5×33 cm) carries the whole design scaled down, ready to cut to a Tele or a Strat pickguard.

Fitting takes an afternoon

Sand, clean, lay the skin on, warm the curves with a hairdryer and trim the routes. No spraying, no booth.

Prefer it ready-made?

Every design here also comes UV printed on a copper-shielded pickguard, or in the box with a bound TL-style kit or body: the binding makes fitting the skin easy.

Common questions

Will the grain line up properly on a curved or contoured body?

The sheet is applied in one piece across the top, so the grain runs continuously over the body and follows gentle contours when the vinyl is warmed and smoothed down. On deep arm or belly cuts the pattern stretches slightly, which tends to look natural on figured patterns such as quilted maple.

Does a printed wood grain look like real timber?

From normal viewing distance the high-gloss laminate gives a finish similar to a lacquered figured top, though the print is flat and lacks the shifting depth of real quilt under light. It works best where you want the look of maple or burl without refinishing the wood.

Do I need to clear coat the skin, and how do I clean it?

No clear coat is needed, as the gloss laminate already protects the print. Wipe it with a soft damp cloth and avoid solvent-based polishes, which can dull the surface.