Fantasy & Mythical Guitar Skins

Fantasy artwork turns a plain guitar body into a scene, with dragons, armoured knights, sorcerers under golden moons and enchanted forest creatures spread across the curves. This page offers these designs as high-gloss laminated vinyl skins in a 50×60 cm body size or a 27.5×33 cm pickguard sheet, some in stock and most printed to order.

  • Full body 50×60 cm or pickguard sheet
  • High-gloss laminated vinyl
  • No clear coat needed
  • In stock or printed to order

Related themes: Snakeskin & Reptile · Horror & Monster · Anime & Manga Style · All guitar skins

Sizes, fitting and questionsShow less

Two sizes, one design

The full body sheet (50×60 cm) covers the front and sides of any guitar or bass body in one piece. The pickguard sheet (27.5×33 cm) carries the whole design scaled down, ready to cut to a Tele or a Strat pickguard.

Size guide: will it cover my body?

Fitting takes an afternoon

Sand, clean, lay the skin on, warm the curves with a hairdryer and trim the routes. No spraying, no booth.

Install guideClear coat without liftCustomer builds

Prefer it ready-made?

Every design here also comes UV printed on a copper-shielded pickguard, or in the box with a bound TL-style kit or body: the binding makes fitting the skin easy.

Tele pickguardStrat pickguardTL-style kit + skinTL-style body + skin

Other themes

Browse all our guitar skins, or another theme:

Skulls & Dark ArtAbstract & OpticalSurreal & DreamscapePattern & TextureForest & LandscapePsychedelic & TrippyHorror & MonsterComic & CartoonVintage, Relic & RustFlower & BotanicalPin-Up & Pop ArtMovie & CinemaSpace & GalaxyBlack & WhitePaint Splatter & DripAnimal & WildlifeHalloweenMacro & Close-UpAnime & Manga StyleSmoke & InkFlame & FireOcean & WaveChristmas & WinterMusic & Rock LegendCyber & TechCamo & MilitaryChrome & MetallicAnimal PrintGraffiti & Street ArtFlagJapanese Art & TattooRetro GamingLightning & ElectricDiamond Plate & IndustrialHolographic & IridescentMarble & StoneQuilted & Flamed MapleWood Grain & BurlCarbon FibreGlitter & SparkleSnakeskin & ReptileCrackle & Cracked PaintTarot, Zodiac & MysticSteampunkLeather & Denim

Common questions

Where does the main figure end up on a guitar body?

The 50×60 cm sheet covers the whole body, so the central figure, such as a knight, wizard or dragon, usually sits on the lower bout where the most surface is visible. On smaller or offset body shapes, the edges of the scene are trimmed away around the outline and cutouts.

Do the scale patterns and detailed scenes look sharp once applied?

Yes, the artwork is printed in full colour and finished with a high-gloss laminate, so fine details like metallic dragon scales and armour stay crisp. No clear coat is needed on top.

Can I use a fantasy design on just the pickguard?

Yes, most designs are available as a 27.5×33 cm pickguard sheet, which suits patterns like gold and silver dragon scales that still read well on a small area. Clean the surface with a damp cloth and avoid solvents to keep the gloss finish intact.