Comic & Cartoon Guitar Skins

Comic and cartoon artwork turns a plain guitar or bass body into a bold, illustrated panel, with zombie hordes, skeleton bands, masked vigilantes, grinning villains and a snowy reindeer scene. Each design comes as a 50×60 cm body sheet or a 27.5×33 cm pickguard sheet in high-gloss laminated vinyl, mostly printed to order.

  • Full body 50×60 cm or pickguard sheet
  • High-gloss laminated vinyl
  • No clear coat needed
  • In stock or printed to order

Related themes: Graffiti & Street Art · Christmas & Winter · Horror & Monster · All guitar skins

Sizes, fitting and questionsShow less

Two sizes, one design

The full body sheet (50×60 cm) covers the front and sides of any guitar or bass body in one piece. The pickguard sheet (27.5×33 cm) carries the whole design scaled down, ready to cut to a Tele or a Strat pickguard.

Size guide: will it cover my body?

Fitting takes an afternoon

Sand, clean, lay the skin on, warm the curves with a hairdryer and trim the routes. No spraying, no booth.

Install guideClear coat without liftCustomer builds

Prefer it ready-made?

Every design here also comes UV printed on a copper-shielded pickguard, or in the box with a bound TL-style kit or body: the binding makes fitting the skin easy.

Tele pickguardStrat pickguardTL-style kit + skinTL-style body + skin

Other themes

Browse all our guitar skins, or another theme:

Skulls & Dark ArtAbstract & OpticalSurreal & DreamscapePattern & TextureForest & LandscapePsychedelic & TrippyFantasy & MythicalHorror & MonsterVintage, Relic & RustFlower & BotanicalPin-Up & Pop ArtMovie & CinemaSpace & GalaxyBlack & WhitePaint Splatter & DripAnimal & WildlifeHalloweenMacro & Close-UpAnime & Manga StyleSmoke & InkFlame & FireOcean & WaveChristmas & WinterMusic & Rock LegendCyber & TechCamo & MilitaryChrome & MetallicAnimal PrintGraffiti & Street ArtFlagJapanese Art & TattooRetro GamingLightning & ElectricDiamond Plate & IndustrialHolographic & IridescentMarble & StoneQuilted & Flamed MapleWood Grain & BurlCarbon FibreGlitter & SparkleSnakeskin & ReptileCrackle & Cracked PaintTarot, Zodiac & MysticSteampunkLeather & Denim

Common questions

Where will the main character land on my body shape?

Most of these designs have a central figure or face, so before cutting, lay the sheet over the body and position that figure below the strings, away from the pickups and bridge. The 50×60 cm sheet leaves room to shift the artwork to suit a single-cut, offset or bass body.

Will the bright comic colours look flat or faded?

The vinyl is high-gloss laminated, so bold outlines and saturated colours stay sharp and shiny without any clear coat. The laminate also shields the print from pick scratches and sweat in normal use.

Can I use a cartoon design just on the pickguard?

Yes, choose the 27.5×33 cm pickguard sheet and apply it to your existing guard or a blank, then trim around the edges and screw holes. This works well for crowded scenes like the zombie or rocker gang artwork, where a cropped section still reads clearly.