Collection: Pin-Up & Pop Art Guitar Skins

Pin-up and pop art designs turn a guitar body into a bold portrait, with retro glamour girls, sugar skull ladies, noir figures and neon city scenes filling the top in strong colour. Each skin is high-gloss laminated vinyl, offered as a 50×60 cm sheet for a whole guitar or bass body or a 27.5×33 cm pickguard sheet.

  • Full body 50×60 cm or pickguard sheet
  • High-gloss laminated vinyl
  • No clear coat needed
  • In stock or printed to order
Sizes, fitting and questionsShow less

Two sizes, one design

The full body sheet (50×60 cm) covers the front and sides of any guitar or bass body in one piece. The pickguard sheet (27.5×33 cm) carries the whole design scaled down, ready to cut to a Tele or a Strat pickguard.

Fitting takes an afternoon

Sand, clean, lay the skin on, warm the curves with a hairdryer and trim the routes. No spraying, no booth.

Prefer it ready-made?

Every design here also comes UV printed on a copper-shielded pickguard, or in the box with a bound TL-style kit or body: the binding makes fitting the skin easy.

Common questions

Where does the face or figure end up on my body shape?

Most designs have the main figure near the centre of the sheet, so on a typical solid body the face sits on the lower bout below the strings. Before trimming, lay the sheet over the body and check that cutouts for pickups, controls and the bridge do not cross the face.

Will the colours and gloss look like a painted finish?

The skins are high-gloss laminated, so they give a shiny finish without any clear coat, and the bright reds, blondes and neon tones stay saturated. Close up you will see a slim edge where the vinyl meets the body sides.

Should I choose the full body sheet or the pickguard sheet?

The 50×60 cm sheet covers a whole guitar or bass top and shows the full portrait, while the 27.5×33 cm sheet suits a pickguard and shows a cropped section of the artwork. Most designs are printed to order, so allow a little extra time unless the item is marked in stock.