Collection: Movie & Cinema Guitar Skins

Cinema artwork turns a guitar body into a small film poster, with gunslingers, hooded riders, jungle helicopters, apes at dawn and neon city scenes spread across the front. Each design comes as a high-gloss laminated vinyl sheet sized for a full guitar or bass body, or as a smaller pickguard sheet.

  • Full body 50×60 cm or pickguard sheet
  • High-gloss laminated vinyl
  • No clear coat needed
  • In stock or printed to order
Sizes, fitting and questionsShow less

Two sizes, one design

The full body sheet (50×60 cm) covers the front and sides of any guitar or bass body in one piece. The pickguard sheet (27.5×33 cm) carries the whole design scaled down, ready to cut to a Tele or a Strat pickguard.

Fitting takes an afternoon

Sand, clean, lay the skin on, warm the curves with a hairdryer and trim the routes. No spraying, no booth.

Prefer it ready-made?

Every design here also comes UV printed on a copper-shielded pickguard, or in the box with a bound TL-style kit or body: the binding makes fitting the skin easy.

Common questions

Will a poster design still read well once it is cut to my body shape?

Most of these designs keep the main figure near the centre, so it sits between the pickups and survives the trim around the horns and waist. You can position the sheet before cutting to choose which part of the scene stays visible.

Do the dark film designs look dull under stage lights?

No, the high-gloss laminate gives deep blacks and strong contrast on designs like the hooded rider or shadowy portraits, much like a printed poster behind glass. No clear coat is needed on top.

Which size should I order for a pickguard only?

Choose the 27.5×33 cm sheet, which covers a standard guitar pickguard with room to trim. For a whole guitar or bass body, take the 50×60 cm sheet; note that most designs are printed to order while some are in stock.