Collection: Quilted & Flamed Maple Guitar Skins

Printed maple grain gives a plain or worn guitar body the look of a figured top, with the depth of quilted or spalted wood rendered in a high-gloss laminated finish. This page offers honey and natural quilted maple and a spalted grain design, in full body sheets or pickguard sheets, some in stock and most printed to order.

  • Full body 50×60 cm or pickguard sheet
  • High-gloss laminated vinyl
  • No clear coat needed
  • In stock or printed to order
Sizes, fitting and questionsShow less

Two sizes, one design

The full body sheet (50×60 cm) covers the front and sides of any guitar or bass body in one piece. The pickguard sheet (27.5×33 cm) carries the whole design scaled down, ready to cut to a Tele or a Strat pickguard.

Fitting takes an afternoon

Sand, clean, lay the skin on, warm the curves with a hairdryer and trim the routes. No spraying, no booth.

Prefer it ready-made?

Every design here also comes UV printed on a copper-shielded pickguard, or in the box with a bound TL-style kit or body: the binding makes fitting the skin easy.

Common questions

Will the grain pattern line up on a curved or carved body shape?

The 50×60 cm sheet covers a whole guitar or bass body, so you can position the figure where it looks best before trimming the edges. On carved tops, heat the vinyl gently and work from the centre outwards so the grain stretches evenly over the curve.

Does a printed quilted maple skin look like real wood?

The designs are printed from photographs of figured maple and finished with a high-gloss laminate, so they read as a glossy figured top at normal viewing distance. Up close it is a flat print, without the shifting shimmer of real quilt under moving light.

Do I need to clear coat the skin, and how do I clean it?

No clear coat is needed, as the gloss laminate already protects the print. Wipe it with a soft, slightly damp cloth and avoid solvent-based polishes that could dull the surface.