Finishing tips
For an even build, keep passes overlapping slightly and maintain the 20 cm distance. Allow adequate curing between coats to reduce sink-back before clear coats and polishing.
Further instruction will be provided along with your order.
Nitrocellulose Spray, Red Solid Cherry — 400 mL guitar lacquer
400 mL nitrocellulose spray lacquer for finishing guitar kits. Spray application lets you paint your guitar easily without a spray gun while achieving a professional finish using Nitorlack nitrocellulose formulated for guitars.
Volume: 400 mL | Type: Nitrocellulose spray lacquer | Colour: Red Solid Cherry | Application: Spray; no spray gun required
- Designed for finishing guitar kits
- More than 40 colours available
- Achieves an easy, professional finish
- Formulated for guitars
Nitrocellulose colour lacquer in Solid Classic Gibson Cherry for guitar finishing.
Usage
The nitrocellulose colour lacquer is applied after the primer/sealer coat to provide the guitar’s colour and add an extra protective layer. The Solid Classic Gibson Cherry lacquer is widely used on Gibson guitars.
Compatibility
Compatible with nitrocellulose primer, nitrocellulose varnish, grain filler, and polish pastes.
Preparation And Application
- Shake the can vigorously for 2–5 minutes before use.
- Apply thin layers to avoid drips and ensure homogeneous coverage.
- Work in an environment with low humidity.
- Spray with a uniform movement from approximately 20 cm distance.
- Wait 12–24 hours between coats; light sanding between coats is recommended.
- Apply a primer and sand to 400 grit before spraying colour.
Safety
Nitrocellulose is toxic; use protection (goggles, mask, gloves) and apply outdoors or in a ventilated area.
