Collection: Full Guitar Skins

Full guitar skins wrap a TL-style body front, back and sides in one artwork: a front skin and a back skin cut to the outline, and a printed side band that runs all the way round. Where a guitar body wrap usually stops at the front, a full guitar skin makes the whole guitar look painted from every angle. Each set is a Monark design with its own story, and some come with a matching headstock decal and engraved neck plate.

  • Front, back and side band
  • Cut to the TL-style outline
  • Made for bound bodies
  • Printed to order
Pieces, fitting and questionsShow less

Three ways to buy

Front covers the top of the body. Front + Back adds the back skin. Front + Back + Side band is the full guitar wrap, with the 1500 × 50 mm band for the sides. On some designs, add the matching headstock decal and engraved neck plate.

Fitting a full skin

The skin stops just inside the binding, so there is no outline to trim: lay it on, squeegee from the middle out, warm the curves and cut the routes. The side band goes on last, between the two bindings.

Prefer it ready-made?

Every design here also comes in the box with our bound TL-style kit or body, so the guitar and its skin arrive together.

More guitar skins

Browse all our guitar skins, or a theme close to these designs:

Common questions

Will a full guitar skin fit my guitar?

The sets are cut for TL-style bodies with binding: our bound TL-style body and most double bound tele bodies. On a body without binding the edge of the skin stays visible, so we recommend a bound body.

How is it different from a guitar body wrap sheet?

A sheet (50 × 60 cm) covers the front and sides of any body and you trim it yourself. A full guitar skin is cut to the TL outline and adds the back and a side band from the same artwork.

Can I clear coat over it?

Yes. Once fitted, the skin can be clear-coated for extra protection: see our guide to clear coat without lift.