Guitar Kit - PR Flame top, Rosewood Fretboard

Rating:

This PR-type DiY guitar kits provided by The Guitar Kit Fabric to build your own electric guitar. This type of electric guitar are renowed for its sustainability and the justesse of the fret. The chords sound distinctly which allow to play acoustic piece. PRS-style electric guitar are also well adapted for Jazz music du to its clean and warm sounds. Bruce Springsteen or Carlos Santana have trusted it for its sonority close to saxophone. A very elegant DiY guitar kits!

Features of the kit:

  • Solid guitar body in mahogany with flame maple top
  • Mahogany neck with rosewood fretboard
  • Pre-wired electric guitar parts in chrome

* Our Guitar Kits price includes VAT. For European countries and the UK, our delivery charge includes all customs charges, if applied.

*This product is not associated to any brands such as Gibson, Ibanez, Fender, PRS, Rickenbacker, etc.

£199.00
Availability: In stock
SKU
KG_PRSmpf_CX_rsd_02

DiY GUITAR KITS WITH HIGH QUALITY WOOD PARTS: SOLID BODY IN MAHOGANY WITH FLAME MAPLE VENEER, ROSEWOOD FRETBOARD NECK, AND PRE-WIRED PARTS TO BUILD YOUR OWN DIY ELECTRIC GUITAR. 


SOLID GUITAR BODY CHARACTERISTICS
Carved and Solid Mahogany Wood With Flame Maple Veneer, White Binding, Set-in Joint

Scale length match: 628mm(24.75")
Neck Pocket Dimension (LxWxH): 70mmx56mmx35mm(2.75"x2.20"x1.38")
Guitar Body Height (H): 40mm(1.57") at the side / 45mm(1.77") at the center
Cavity/Routing made: Pick-up, Bridge, Neck, Wiring routing, cover plates and switch. No pre-drilled pilots holes except for the neck pocket.
Paint: No lacquer, no finish
Right Handed Body

GUITAR NECK CHARACTERISTICS
PR headstock style, Canadian Maple Wood with Rosewood Fretboard, 24 frets, White perloid dot inlay, White Bone Nut (42mm), Set-in Joint

Scale length: 628mm(24.75")
Neck Radius: 305mm (12")
Truss Rod: double action, on the head side
Paint: No lacquer, no finish
Heel Dimension (LxWxH): 100x56x37mm (4.33"x2.20"x1.46")
* heel height doesn’t include the fingerboard. Add ~6mm to include fingerboard
Right Handed Neck

PRE-SOLDERED GUITAR PARTS CHARACTERISTICS
Solderless Chrome Set

Bridge: Tune-o-matic in chrome
Pick-up: 2 Humbucker, chrome (H-H Configuration)
Switch: 3-way toggle switch, chrome
Machine Head: 3R3L, chrome
Knobs: 1 black volume and 1 black tone
Strap Button: chrome
Covers: Back Cover for knobs and switch and Back Cover for tremolo, Black
Right Handed Hardware

► Complete electronics, screws, electric guitar parts, hardware and strings fully compatible with our electric guitar kit, guitar body and neck.

* Technical support & Instruction guide provided in your DiY Guitar Kit to build your own Guitar.

Write Your Own Review
You're reviewing:Guitar Kit - PR Flame top, Rosewood Fretboard
Your Rating